Galvanized 80-300mm 90 Degree Bend Coupling for Dust Extraction System
Keywords: Pressed bends , elbows, ventilation ducts parts
Our pressed bends in standard sizes up to 300mm diameter are smooth, pressed bends for efficient flow, reduced pressure loss, and elimination of blockages. Radius is 1.5 x Diameter. The bends are available in 90°, 60°, 45°, 30°.
Pipe elbow Bends Application:
- Chemical Architecture:Used to connect of chemical powder pipe and connect of the architecture pippe.
- Leichtindustrie:Mainlly apply in the cleaning system of furniture factory and serious leichtindustries.
- Sanitation environmental production department:Application of connection biowing off piping.
The specifications of pressed bends:
| ¢D MM | 90º | 60º | 45º | 30º | R MM | S
MM |
| 80 | B8090 | B8060 | B8045 | B8030 | 120 | 1 |
| 100 | B10090 | B10060 | B10045 | B10030 | 150 | 1 |
| 125 | B12590 | B12560 | B12545 | B12530 | 187.5 | 1 |
| 140 | B14090 | B14060 | B14045 | B14030 | 210 | 1 |
| 150 | B15090 | B15060 | B15045 | B15030 | 225 | 1 |
| 160 | B16090 | B15060 | B15045 | B15030 | 240 | 1 |
| 180 | B18090 | B18060 | B18045 | B18030 | 270 | 1 |
| 200 | B20090 | B20060 | B20045 | B20030 | 300 | 1 |
| 225 | B22590 | B22560 | B22545 | B22530 | 337.5 | 1 |
| 250 | B25090 | B25060 | B25045 | B25030 | 375 | 1 |
| 275 | B27590 | B27560 | B27545 | B27530 | 412.5 | 1 |
| 300 | B30090 | B30060 | B30045 | B30030 | 450 | 1 |
Pressed Bends Features:
-quick assembly
- factory fitted seal with no loose fittings
-can be twisted and adjusted, but has no effect on the gas tighteness
-installation without sealant or solvents
-can be used in all kinds of climates
-the gas tighteness can keep good from 5000 Pa negtive pressure to 3000 Pa positive pressure
-both ends of the fittings are disposed with the process of turnup, which makes both ends smooth, reinforced and also underformed.
Other related ductwork pipe fittings: duct clamps, blast gate, air damper, reducer, flanges
Contact:
email: info(at)ypmachinery.com
whatspp:008615028109230
Product Tags:
|
|
Galvanised 80-300mm 90 Degree Bend Coupling For Dust Extraction System Images
|
